Synthetic recovery of impulse propagation in myocardial infarction via silicon carbide semiconductive nanowires.

Myocardial infarction causes 7.3 million deaths worldwide, mostly for fibrillation that electrically originates from the damaged areas of the left ventricle. Conventional cardiac bypass graft and percutaneous coronary interventions allow reperfusion of the downstream tissue but do not counteract the bioelectrical alteration originated from the infarct area. Genetic, cellular, and tissue engineering therapies are promising avenues but require days/months for permitting proper functional tissue regeneration. Here we engineered biocompatible silicon carbide semiconductive nanowires that synthetically couple, via membrane nanobridge formations, isolated beating cardiomyocytes over distance, restoring physiological cell-cell conductance, thereby permitting the synchronization of bioelectrical activity in otherwise uncoupled cells. Local in-situ multiple injections of nanowires in the left ventricular infarcted regions allow rapid reinstatement of impulse propagation across damaged areas and recover electrogram parameters and conduction velocity. Here we propose this nanomedical intervention as a strategy for reducing ventricular arrhythmia after acute myocardial infarction.

Enhancement of X-ray-Excited Red Luminescence of Chromium-Doped Zinc Gallate via Ultrasmall Silicon Carbide Nanocrystals.

X-ray-activated near-infrared luminescent nanoparticles are considered as new alternative optical probes due to being free of autofluorescence, while both their excitation and emission possess a high penetration efficacy in vivo. Herein, we report silicon carbide quantum dot sensitization of trivalent chromium-doped zinc gallate nanoparticles with enhanced near-infrared emission upon X-ray and UV-vis light excitation. We have found that a ZnGa2O4 shell is formed around the SiC nanoparticles during seeded hydrothermal growth, and SiC increases the emission efficiency up to 1 order of magnitude due to band alignment that channels the excited electrons to the chromium ion.

Quantitative Nanoscale Absorption Mapping: A Novel Technique To Probe Optical Absorption of Two-Dimensional Materials.

Two-dimensional semiconductors, in particular transition metal dichalcogenides and related heterostructures, have gained increasing interest as they constitute potential new building blocks for the next generation of electronic and optoelectronic applications. In this work, we develop a novel nondestructive and noncontact technique for mapping the absorption properties of 2D materials, by taking advantage of the underlying substrate cathodoluminescence emission. We map the quantitative absorption of MoS2 and MoSe2 monolayers, obtained on sapphire and oxidized silicon, with nanoscale resolution. We extend our technique to the characterization of the absorption properties of MoS2/MoSe2 van der Waals heterostructures. We demonstrate that interlayer excitonic phenomena enhance the absorption in the UV range. Our technique also highlights the presence of defects such as grain boundaries and ad-layers. We provide measurements on the absorption of grain boundaries in monolayer MoS2 at different merging angles. We observe a higher absorption yield of randomly oriented monolayers with respect to 60° rotated monolayers. This work opens up a new possibility for characterizing the functional properties two-dimensional semiconductors at the nanoscale.

Sub-Micropillar Spacing Modulates the Spatial Arrangement of Mouse MC3T3-E1 Osteoblastic Cells.

Surface topography is one of the main factors controlling cell responses on implanted devices and a proper definition of the characteristics that optimize cell behavior may be crucial to improve the clinical performances of these implants. Substrate geometry is known to affect cell shape, as cells try to optimize their adhesion by adapting to the irregularities beneath, and this in turn profoundly affects their activity. In the present study, we cultured murine calvaria MC3T3-E1 cells on surfaces with pillars arranged as hexagons with two different spacings and observed their morphology during adhesion and growth. Cells on these highly ordered substrates attached and proliferated effectively, showing a marked preference for minimizing the inter-pillar distance, by following specific pathways across adjacent pillars and displaying consistent morphological modules. Moreover, cell behavior appeared to follow tightly controlled patterns of extracellular protein secretion, which preceded and matched cells and, on a sub-cellular level, cytoplasmic orientation. Taken together, these results outline the close integration of surface features, extracellular proteins alignment and cell arrangement, and provide clues on how to control and direct cell spatial order and cell morphology by simply acting on inter-pillar spacing.

Strain engineering of core-shell silicon carbide nanowires for mechanical and piezoresistive characterizations.

This study evaluated the mechanical properties and piezoresistivity of core-shell silicon carbide nanowires (C/S-SiCNWs) synthesized by a vapor-liquid-solid technique, which are a promising material for harsh environmental micro electromechanical systems (MEMS) applications. The C/S-SiCNWs were composed of a crystalline cubic (3C) SiC core wrapped by an amorphous silicon dioxide (SiO x ) shell; however, TEM observations of the NWs showed that hexagonal polytypes (2H, 4H , and 6H) were partially induced in the core by a stacking fault owing to a Shockley partial dislocation. The stress-strain relationship of the C/S-SiCNWs and SiC cores without an SiO x shell was examined using MEMS-based nanotensile tests. The tensile strengths of the C/S-SiCNWs and SiC cores were 7.0 GPa and 22.4 GPa on average, respectively. The lower strength of the C/S-SiCNWs could be attributed to the SiO x shell with the surface roughness as the breaking point. The Young's modulus of the C/S-SiCNWs was 247.2 GPa on average, whereas that of the SiC cores had a large value with scatter data ranging from 450 to 580 GPa. The geometrical model of the SiC core based on the transmission electron microscopy observations rationalized this scatter data by the volume content of the stacking fault in the core. The piezoresistive effects of the C/S-SiCNW and SiC core were also evaluated from the I-V characteristics under uniaxial tensile strain. The gauge factor of -30.7 at 0.008 ε for the C/S-SiCNW was approximately two-times larger than that of -15.8 at 0.01 ε for the SiC core. This could be caused by an increase of the surface state density at the SiO x /SiC interface owing to the positive fixed oxide charge of the SiO x shell.

Macroalgae to nanoparticles: Study of Ulva lactuca L. role in biosynthesis of gold and silver nanoparticles and of their cytotoxicity on colon cancer cell lines.

Marine bio-resources are being widely studied as an invaluable source of compounds with therapeutic applicability. In particular, macroalgae contain an extended variety of bioactive compounds with different structures and promising biological applications. In this work, Ulva lactuca L. (hereafter UL) was utilyzed for the synthesis of gold and silver nanoparticles. Full characterization by UV-Vis spectroscopy, TEM, HRTEM and STEM miscroscopies, Z Potential and FTIR spectroscopy was performed. The first time in the scientific literature, the composition of carbohydrates of UL extract and their changes observed after nanoparticles synthesis were explored in order to investigate their possible role in the biosynthetic process. The reducing power, total phenolic content and DPPH scavenging activity of UL extract, Au@UL and Ag@UL nanoparticles were determined. The effects of UL extract, Au@UL and Ag@UL were tested in vitro on the colon cancer cell lines HT-29 and Caco-2, on normal primary neonatal dermal fibroblast cell line PCS-201-010, as well as on normal colon cell line CCD-112CoN. Lastly, the apoptotic activity and cellular uptake evaluation was determined for Au@UL and Ag@UL.

Osteoblasts preferentially adhere to peaks on micro-structured titanium.

The aim of the study was to investigate cell adhesion to micro-structured titanium. Osteoblastic MC3T3 cells were cultured on smooth (P) or sand-blasted/acid-etched (SLA) titanium discs and were observed at scanning electron microscope/focused ion beam (SEM/FIB). Myosin II and actin microfilaments were labelled for epifluorescence microscopy. FIB revealed that cell adhesion initiated centrally and expanded to the cell periphery and that cells attached on the substrate by bridging over the titanium irregularities and adhering mostly on surface peaks. Gaps were visible between concave areas and cytoplasm and areas around ridges represented preferred attachment points for cells. A different myosin distribution was observed between samples and myosin inhibition affected cell responses. Taken together our data indicate that cells attach on micro-rough titanium by bridging over its irregularities. This is likely mediated by myosin II, whose distribution is altered in cells on SLA discs.

CeF3-ZnO scintillating nanocomposite for self-lighted photodynamic therapy of cancer.

We report on the synthesis and characterization of a composite nanostructure based on the coupling of cerium fluoride (CeF3) and zinc oxide (ZnO) for applications in self-lighted photodynamic therapy. Self-lighted photodynamic therapy is a novel approach for the treatment of deep cancers by low doses of X-rays. CeF3 is an efficient scintillator: when illuminated by X-rays it emits UV light by fluorescence at 325 nm. In this work, we simulate this effect by exciting directly CeF3 fluorescence by UV radiation. ZnO is photo-activated in cascade, to produce reactive oxygen species. This effect was recently demonstrated in a physical mixture of distinct nanoparticles of CeF3 and ZnO [Radiat. Meas. (2013) 59:139-143]. Oxide surface provides a platform for rational functionalization, e.g., by targeting molecules for specific tumors. Our composite nanostructure is stable in aqueous media with excellent optical coupling between the two components; we characterize its uptake and its good cell viability, with very low intrinsic cytotoxicity in dark.

S-induced modifications of the optoelectronic properties of ZnO mesoporous nanobelts.

The synthesis of ZnO porous nanobelts with high surface-to-volume ratio is envisaged to enhance the zinc oxide sensing and photocatalytic properties. Yet, controlled stoichiometry, doping and compensation of as-grown n-type behavior remain open problems for this compound. Here, we demonstrate the effect of residual sulfur atoms on the optical properties of ZnO highly porous, albeit purely wurtzite, nanobelts synthesized by solvothermal decomposition of ZnS hybrids. By means of combined cathodoluminescence analyses and density functional theory calculations, we attribute a feature appearing at 2.36 eV in the optical emission spectra to sulfur related intra-gap states. A comparison of different sulfur configurations in the ZnO matrix demonstrates the complex compensating effect on the electronic properties of the system induced by S-inclusion.

Nanoscale mapping of plasmon and exciton in ZnO tetrapods coupled with Au nanoparticles.

Metallic nanoparticles can be used to enhance optical absorption or emission in semiconductors, thanks to a strong interaction of collective excitations of free charges (plasmons) with electromagnetic fields. Herein we present direct imaging at the nanoscale of plasmon-exciton coupling in Au/ZnO nanostructures by combining scanning transmission electron energy loss and cathodoluminescence spectroscopy and mapping. The Au nanoparticles (~30 nm in diameter) are grown in-situ on ZnO nanotetrapods by means of a photochemical process without the need of binding agents or capping molecules, resulting in clean interfaces. Interestingly, the Au plasmon resonance is localized at the Au/vacuum interface, rather than presenting an isotropic distribution around the nanoparticle. On the contrary, a localization of the ZnO signal has been observed inside the Au nanoparticle, as also confirmed by numerical simulations.

The critical role of intragap states in the energy transfer from gold nanoparticles to TiO2.

Cathodoluminescence spectroscopy is profitably exploited to study energy transfer mechanisms in Au and Pt/black TiO2 heterostructures. While Pt nanoparticles absorb light in the UV region, Au nanoparticles absorb light by surface plasmon resonance and interband transitions, both of them occurring in the visible region. The intra-bandgap states (oxygen vacancies) of black TiO2 play a key role in promoting both hot electron transfer and plasmonic resonant energy transfer from Au nanoparticles to the TiO2 semiconductor with a consequent photocatalytic H2 production increase. An innovative criterion is introduced for the design of plasmonic composites with increased efficiency under visible light.

PEDOT:PSS Interfaces Support the Development of Neuronal Synaptic Networks with Reduced Neuroglia Response In vitro.

The design of electrodes based on conductive polymers in brain-machine interface technology offers the opportunity to exploit variably manufactured materials to reduce gliosis, indeed the most common brain response to chronically implanted neural electrodes. In fact, the use of conductive polymers, finely tailored in their physical-chemical properties, might result in electrodes with improved adaptability to the brain tissue and increased charge-transfer efficiency. Here we interfaced poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) ( PEDOT: PSS) doped with different amounts of ethylene glycol (EG) with rat hippocampal primary cultures grown for 3 weeks on these synthetic substrates. We used immunofluorescence and scanning electron microscopy (SEM) combined to single cell electrophysiology to assess the biocompatibility of PEDOT: PSS in terms of neuronal growth and synapse formation. We investigated neuronal morphology, density and electrical activity. We reported the novel observation that opposite to neurons, glial cell density was progressively reduced, hinting at the ability of this material to down regulate glial reaction. Thus, PEDOT: PSS is an attractive candidate for the design of new implantable electrodes, controlling the extent of glial reactivity without affecting neuronal viability and function.

Carbon-doped SiO(x) nanowires with a large yield of white emission.

The growth of SiOx nanowires (NWs) with intense white emission is reported. Due to carbon monoxide gas being used as a dopant precursor, carbon-doped under-stoichiometric silicon dioxide NWs are obtained. The doping of the NWs is studied by means of x-ray photoelectron spectroscopy, which allows to assess the presence of carbon atoms in the silicon oxide amorphous structure. The light emission properties are studied by means of cathodoluminescence spectroscopy, which shows three main emission bands set at 2.7 eV (blue), 2.3 eV (green) and 1.9 eV (red), resulting in the white emission.

Selective ultrathin carbon sheath on porous silicon nanowires: materials for extremely high energy density planar micro-supercapacitors.

Microsupercapacitors are attractive energy storage devices for integration with autonomous microsensor networks due to their high-power capabilities and robust cycle lifetimes. Here, we demonstrate porous silicon nanowires synthesized via a lithography compatible low-temperature wet etch and encapsulated in an ultrathin graphitic carbon sheath, as electrochemical double layer capacitor electrodes. Specific capacitance values reaching 325 mF cm(-2) are achieved, representing the highest specific ECDL capacitance for planar microsupercapacitor electrode materials to date.

Visible and infra-red light emission in boron-doped wurtzite silicon nanowires.

Silicon, the mainstay semiconductor in microelectronic circuitry, is considered unsuitable for optoelectronic applications owing to its indirect electronic band gap, which limits its efficiency as a light emitter. Here we show the light emission properties of boron-doped wurtzite silicon nanowires measured by cathodoluminescence spectroscopy at room temperature. A visible emission, peaked above 1.5 eV, and a near infra-red emission at 0.8 eV correlate respectively to the direct transition at the Γ point and to the indirect band-gap of wurtzite silicon. We find additional intense emissions due to boron intra-gap states in the short wavelength infra-red range. We present the evolution of the light emission properties as function of the boron doping concentration and the growth temperature.

Preparing the way for doping wurtzite silicon nanowires while retaining the phase.

It is demonstrated that boron-doped nanowires have predominantly long-term stable wurtzite phase while the majority of phosphorus-doped ones present diamond phase. A simplified model based on the different solubility of boron and phosphorus in gold is proposed to explain their diverse effectiveness in retaining the wurtzite phase. The wurtzite nanowires present a direct transition at the Γ point at approximately 1.5 eV while the diamond ones have a predominant emission around 1.1 eV. The aforementioned results are intriguing for innovative solar cell devices.

Surface functionalization of nanostructured Fe2O3 polymorphs: from design to light-activated applications.

Nanostructured iron(III) oxide deposits are grown by chemical vapor deposition (CVD) at 400-500 °C on Si(100) substrates from Fe(hfa)2TMEDA (hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate; TMEDA = N,N,N',N'-tetramethylethylenediamine), yielding the selective formation of α-Fe2O3 or the scarcely studied ε-Fe2O3 polymorphs under suitably optimized preparative conditions. By using Ti(OPr(i))4 (OPr(i) = iso-propoxy) and water as atomic layer deposition (ALD) precursors, we subsequently functionalized the obtained materials at moderate temperatures (<300 °C) by an ultrathin titanomagnetite (Fe3-xTixO4) overlayer. An extensive multitechnique characterization, aimed at elucidating the system structure, morphology, composition and optical properties, evidenced that the photoactivated hydrophilic and photocatalytic behavior of the synthesized materials is dependent both on iron oxide phase composition and ALD surface modification. The proposed CVD/ALD hybrid synthetic approach candidates itself as a powerful tool for a variety of applications where semiconductor-based nanoarchitectures can benefit from the coupling with an ad hoc surface layer.

Electronic properties of CuPc and H2Pc: an experimental and theoretical study.

Phthalocyanine (H2Pc) and its open-shell copper complex (CuPc) deposited on amorphous gold films have been studied by combining the outcomes of several synchrotron based spectroscopic tools (X-ray photoelectron spectroscopy, UV photoelectron spectroscopy and near-edge X-ray absorption fine structure, NEXAFS, spectroscopy) with those of density functional theory (DFT) calculations. The assignment of experimental evidence has been guided by the results of DFT numerical experiments carried out on isolated molecules. With specific reference to CuPc NEXAFS data collected at the N K-edge, they have been assigned by using the open-shell time-dependent DFT (TDDFT) in the framework of the zeroth order regular approximation (ZORA) scalar relativistic approach. The agreement between theory and experiment has been found to be satisfactory, thus indicating that the open-shell TDDFT (F. Wang and T. Ziegler, Mol. Phys., 2004, 102, 2585) may be used with some confidence to look into the X-ray absorption spectroscopy results pertinent to transition metal complexes. As far as the metal-ligand interaction is concerned, the combined use of NEXAFS spectroscopy and DFT outcomes ultimately testified the significant ionic contribution characterizing the bonding between the metal centre and the nitrogen atoms of the phthalocyanine coordinative pocket.

Optical properties of hybrid T3Pyr/SiO2/3C-SiC nanowires.

A new class of nanostructured hybrid materials is developed by direct grafting of a model thiophene-based organic dye on the surface of 3C-SiC/SiO2 core/shell nanowires. TEM-EDX analysis reveals that the carbon distribution is more spread than it would be, considering only the SiC core size, suggesting a main contribution from C of the oligothiophene framework. Further, the sulfur signal found along the treated wires is not detected in the as-grown samples. In addition, the fluorescent spectra are similar for the functionalized nanostructures and T3Pyr in solution, confirming homogeneous molecule grafting on the nanowire surface. Chemical and luminescence characterizations confirm a homogeneous functionalization of the nanowires. In particular, the fluorophore retains its optical properties after functionalization.